ماكينة التقطيع بالبلازما Voortman V304

This VOORTMAN V304 was manufactured in 2015. A robust plasma cutting machine, it's ideal for precision cutting tasks. Consider the opportunity to buy this VOORTMAN V304 plasma cutting machine. Contact us for further details.
Location: HU
Voltage stabilizer: not included
Ambient temperature: 0–35°c, max. 95% relative humidity
Working height: 705 mm (±20 mm)
Power per servo drive: 26 kw
Acceleration: 1000 mm/s²
Maximum pierce capacity: 40 mm
Dross-free cutting (maximum): 35 mm
Marking lines: yes, with the same consumables
Plasma gas (mild steel): cutting: o₂ (999% pure, clean, dry, oil-free); marking: argon gas or o₂/air (999% pure, clean, dry, oil-free)
Shield gas (mild steel): yes
Automatic gas console: yes
Grounding: maximum 6 m of the machine. Ac power, pe, and service grounds must comply with local and national codes
Machine Benefits
Qualitative Machine Benefits
The plasma 3d bevel unit has a maximum acceleration of 2000 mm/s² on the z-axis
a maximum speed of 365 mm/s on the z-axis
a bevel angle of ±50° depending on the torch type
a positioning accuracy of ±0. 5°
and supports material thicknesses of 6–50 mm
The oxy-fuel cutting unit is a nozzle mix type with a magnetic valve and backfire protection for gas supply
automatic external ignition
a maximum thickness of 200 mm for 1 or 2 pieces
125 mm for 3 pieces
100 mm for 4 pieces
75 mm for 5 pieces
and 60 mm for 6 pieces
using acetylene gas as standard
propane as an optional gas
and o₂ as the cutting gas
The voortman height control has a maximum acceleration of 2000 mm/s² on the z-axis and a maximum speed of 365 mm/s on the z-axis
Working height: 705 mm (±20 mm)
Technical Machine Benefits
Cutting speed for mild steel is approximately 3700 mm/min at 90a for 6 mm
3600 mm/min at 200a for 12 mm
1600 mm/min at 300a for 25 mm
720 mm/min at 300a for 40 mm
400 mm/min at 300a for 50 mm
and 100 mm/min at 300a for 80 mm
Extra Information
Machine still under power