ماكينة الملصقات Krones Ergomodul

Table pitch diameter: 1,200 mm
Rotary plates: 30
Machine pitch: 125.6 mm
Main drive: controlled servo motor; Danfoss servo motors, container table
Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar
Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm
Container infeed: worm with servo drive; detects damaged and fallen-over containers
Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed
Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply
Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control
Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass)
Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components
Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A
Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water
net weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg)
Overview
Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section
Two docking positions at the carrousel
both in operation
accept the four labelling stations without tools
so cold-glue and self-adhesive labelling run on the same carrousel
height adjustment of the top part and each station is motorised with container type preselection
Technical data
Equipment
2x ERGOMATIC-CL cold-glue labelling stations
interchangeable
2x AUTOCOL-TS self-adhesive labelling stations
interchangeable
Stand-alone control cabinet with Krones iPanel operator terminal
Central lubrication (Lincoln progressive distributor with motor pump)
Ecopush rejection module
Handling parts set on trolleys
The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine
Condition
Used
still installed and under power in an operating line
on-site inspection possible before purchase
Availability
Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany
dismantling
loading and transport quoted on request