آلة قطع يموت Bobst Autoplaten SP 104-E (1998) للبيع عن طريق المزاد

Production Rate: 8,000 sheets/hour
Max Sheet Size: 1,040 x 740 mm / 40.94 x 29.13 in
Min Sheet Size: 400 x 350 mm / 15.75 x 13.78 in
Max Die-Cutting Size: (with gripper margin) 1,040 x 725 mm / 40.94 x 28.54 in
Max Cutting Die Size: 1,050 x 746 mm / 41.34 x 29.37 in
Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm / 0.16 in
Max Platen Pressure: 2.5 MN (250 t) / 276 US tons
Max Pile Height: Feeder 1,400 mm / 55.12 in (non-stop 1,100 mm / 43.31 in), delivery 1,120 mm / 44.09 in
Max Pallet Size: 1,200 x 800 mm / 47.24 x 31.50 in
Bobst Autoplaten SP 104-E (1998)
Automatic die cutter for paper and carton converting
running sheets up to 1,040
x 740 mm at up to 8,000 sheets per hour. The press is equipped with an
automatic waste stripping station and a pile delivery with manual non-stop rack
and front waste removal device. Operation runs via the Bobst C.U.B.E. control
system with an additional panel at the feeder
supported by Bernoulli sheet
braking at the stripping station
Equipment
###Machine
Platform with safety barrier
Machine elevated by 415 mm
including platform elevation
Centerline system for off-press tool preparation
quick registering and fast
setting of adjustable elements
Electrical cabinet with air conditioner
Light beam indicator for machine state
Sheet passage control unit with infrared cells
4 auxiliary control panels
C.U.B.E. centralized microprocessor control unit with LCD display and
keyboard for sheet counting
cutting force with adjustable overload
limitator
speed setting and synoptic status display
Additional C.U.B.E. control panel at the feeder
Bernoulli sheet braking device at stripping station
Three-phase asynchronous main motor with frequency converter control
###Feeder
Floating pallet tray with manual handle for lateral adjustment during production
Suction unit with multiple adjustments
Pile height control with front photocell
Side blowers laterally adjustable with Centerline marks
Automatic vertical compensation of the suction head
Manual non-stop device
Sheet synchronization device adjustable during operation
###Feed Table
Anti-static stainless steel plate
Upper transport for paper
carton and corrugated board up to 4 mm
Upper frame with manual lifting device
4 fixed position lower feed belts
4 paired adjustable front lays
Pull guide (OS) adjustable with Centerline marks
Sheet presence control and double sheet detector
Sheet synchronization device with manual adjustment
machine stopped
###Platen Press
3x upper chase with quick locking
fixed bottom plate
Lower ground steel cutting plate
5 mm
Lower supporting plate of synthetic material
22.5 mm
Device for diecutting without gripper margin
Gripper bar reopening device
Compensation plate
4 mm ground steel
Adjustable centerings for the lower supporting plate
±0.9 mm
###Waste Stripping Station
2x upper pull-out frame
2x lower pull-out frame
Central quick lock pull-out frame
###Delivery
Pile tray
Rear and side joggers adjustable with Centerline marks
Manual non-stop rack
Front pivoting joggers
pneumatically controlled
allowing sheet sampling without stopping production
Special sheet push-down device for paper
Front waste removal device with conveyor apron for lateral evacuation (OOS)
###Technical Details
###Compressed Air
min. 6 bar / 87 psi
without central supply a compressor of 7.5 m³/h with 110 l tank is required
###Net Weight
15,000 kg / 33,069 lb
###Electricity
Main motor 11 kW
total connected load max. 25 kVA
###Note
The buyer is responsible for disassembly themselves
no tools are provided
still connected to power